RIO 32/24D
CODICE PRODOTTO:RIO 32/24D
Prezzo: Per i prezzi e per ulteriori informazioni contattare: shop@remixsound.com
Disponibilità : disponibile


Un fattore chiave che rende la serie CL cos flessibile la coppia di rack I/O di integrazione Rio32/24-D e Rio16/08-D, oltre alla presenza esclusiva nelle console della rete Dante integrata come caratteristica standard.

possibile costruire in modo semplice un sistema scalabile collegando contemporaneamente fino a 8 rack I/O tramite Dante, disponendo in tal modo di un massimo di 256 sorgenti di ingresso. anche possibile configurare in cascata coppie di console della serie CL per necessit di missaggio di dimensioni superiori.

Il collegamento dei sistemi di base semplice, tramite la utility di configurazione automatica della console. Due o pi console possono condividere gli ingressi da un set di rack I/O senza il rischio di cambiamenti di livello imprevisti grazie all'inserimento della compensazione del gain automatica all'interno degli stessi rack I/O. Grazie alla modalit operativa a 32 bit di Dante, la compensazione del gain pu essere impostata senza un impatto percettibile sulla gamma dinamica.

Il Rio 32/24 comprende inoltre 4 uscite AES-EBU stereo, che gestiscono i segnali nel dominio digitale direttamente verso l'amplificatore. Le nuove console dispongono, sul pannello posteriore, di 3 slot per schede MY, garantendo la compatibilit con qualsiasi formato audio esistente e con le schede pi recenti quali la scheda di speaker processing MY8-Lake e la scheda di missaggio automatico MY16-Dugan.

I 3 slot per schede mettono a disposizione anche I/O aggiuntivi che si uniscono agli 8 ingressi microfonici e alle 8 uscite di linea presenti sulla console.

Altre informazioni

Specifiche tecniche

Rio3224-D, Rio1608-D

General specifications Rio3224-D Rio1608-D
Sampling frequency rate Internal 44.1kHz, 48kHz, 88.2kHz, 96kHz 44.1kHz, 48kHz, 88.2kHz, 96kHz
External 44.1kHz: +4.1667%, +0.1%, -0.1%, -4.0% (200ppm) / 48kHz: +4.1667%, +0.1%, -0.1%, -4.0% (200ppm) / 88.2kHz: +4.1667%, +0.1%, -0.1%, -4.0% (200ppm) / 96kHz: +4.1667%, +0.1%, -0.1%, -4.0% 44.1kHz: +4.1667%, +0.1%, -0.1%, -4.0% (200ppm) / 48kHz: +4.1667%, +0.1%, -0.1%, -4.0% (200ppm) / 88.2kHz: +4.1667%, +0.1%, -0.1%, -4.0% (200ppm) / 96kHz: +4.1667%, +0.1%, -0.1%, -4.0%
Signal delay Less than 3ms INPUT to OUTPUT, connect with CL5 using Dante, Dante Receive Latency set to 0.25ms (one way), Fs=48kHz Less than 3ms INPUT to OUTPUT, connect with CL5 using Dante, Dante Receive Latency set to 0.25ms (one way), Fs=48kHz
Total harmonic distortion Less than 0.05% 20Hz-20kHz@+4dBu into 600Ω, Fs=44.1kHz, 48kHz / Less than 0.05% 20Hz-40kHz@+4dBu into 600Ω, Fs=88.2kHz, 96kHz INPUT to OUTPUT, Input Gain = Min. Less than 0.05% 20Hz-20kHz@+4dBu into 600Ω, Fs=44.1kHz, 48kHz / Less than 0.05% 20Hz-40kHz@+4dBu into 600Ω, Fs=88.2kHz, 96kHz INPUT to OUTPUT, Input Gain = Min.
Frequency response +0.5, -1.5dB 20Hz-20kHz, refer to +4dBu output @1kHz, INPUT to OUTPUT, Fs=44.1kHz, 48kHz / +0.5, -1.5dB 20Hz-40kHz, refer to +4dBu output @1kHz, INPUT to OUTPUT, Fs=88.2kHz, 96kHz +0.5, -1.5dB 20Hz-20kHz, refer to +4dBu output @1kHz, INPUT to OUTPUT, Fs=44.1kHz, 48kHz / +0.5, -1.5dB 20Hz-40kHz, refer to +4dBu output @1kHz, INPUT to OUTPUT, Fs=88.2kHz, 96kHz
Dynamic range 108dB typ., INPUT to OUTPUT, Input Gain = Min 108dB typ., INPUT to OUTPUT, Input Gain = Min
Crosstalk -100dB, adjacent INPUT/OUTPUT channels, Input Gain = Min. -100dB, adjacent INPUT/OUTPUT channels, Input Gain = Min.
Power requirements US/Canada: 120V 60Hz, Japan: 100V 50/60Hz, China: 110-240V 50/60Hz, Korea: 220V 60Hz, Other: 110-240V 50/60Hz US/Canada: 120V 60Hz, Japan: 100V 50/60Hz, China: 110-240V 50/60Hz, Korea: 220V 60Hz, Other: 110-240V 50/60Hz
Power consumption 120W 70W
Dimensions W 480mm (18 7/8in) 480mm (18 7/8in)
H 232mm (9 1/4in) 144mm (5 3/4in)
D 361.5mm (14 1/4in) 361.5mm (14 1/4in)
Net weight 12.4kg (27.3lb) 8.8kg (19.4lb)
Others Temperature Range: Operating temperature range: 0 - 40℃, Storage temperature range: -20 - 60℃ Temperature Range: Operating temperature range: 0 - 40℃, Storage temperature range: -20 - 60℃

Analog input characteristics

Input Terminals GAIN Actual Load
Impedance
For Use With
Nominal
Input Level Connector
Nominal Max. before clip
INPUT 1-16 +66dB 10kΩ 50-600Ω Mics &
600Ω Lines
-62dBu (0.616mV)
 
-42dBu (6.16mV)
 
XLR-3-31 type (Balanced)*1
+18dB -14dBu (155mV) +6dBu (1.55V)
+17dB 3kΩ -13dBu (174mV)
 
+7dBu (1.74V)
 
-6dB +10dBu (2.45V) +30dBu (24.5V)
INPUT 17-32*5 +66dB 10kΩ 50-600Ω Mics &
600Ω Lines
-62dBu (0.616mV)
 
-42dBu (6.16mV)
 
XLR-3-31 type (Balanced)*1
+18dB -14dBu (155mV) +6dBu (1.55V)
+17dB 3kΩ -13dBu (174mV)
 
+7dBu (1.74V)
 
-6dB +10dBu (2.45V) +30dBu (24.5V)

*1. XLR-3-31 type connectors are balanced.(1=GND, 2=HOT, 3=COLD)
*2. In these specifications, 0dBu = 0.775 Vrms.
*3. All input AD converters are 24bit linear, 128times oversampling.
*4. +48V DC ( phantom power ) is supplied to INPUT XLR type connectors via each individual software controlled switch. *5. Rio3224-D only

Analog output characteristics

Output Terminals Actual Source
Impedance
For Use With
Nominal
Max.Output Level
Select SW*4
Output Level Connector
Nominal Max. before clip
OUTPUT 1-8 75Ω 600Ω Lines +24dB (default) +4dBu (1.23 V)
 
+24dBu (12.3V)
 
XLR-3-32 type (Balanced)*1
+18dB -2dBu (616mV) +18dBu (6.16V)
OUTPUT 9-16*5 75Ω 600Ω Lines +24dB (default) +4dBu (1.23 V)
 
+24dBu (12.3V)
 
XLR-3-32 type (Balanced)*1
+18dB -2dBu (616mV) +18dBu (6.16V)

*1. XLR-3-32 type connectors are balanced.( 1=GND, 2=HOT, 3=COLD )
*2. In these specifications, 0dBu = 0.775 Vrms.
*3. All output DA converters are 24bit, 128times oversampling.
*4. There are switches inside the body to preset the maximum output level. *5. Rio3224-D only

Digital Input & Output Characteristics

Terminal Format Data length Level Audio Connector
Primary/Secondary Dante 24bit or 32bit 1000Base-T 24ch Input/32ch Output (Rio3224-D)
8ch Input/16ch Output (Rio1608-D)
etherCON Cat5e

Digital Output Characteristics

Terminal Format Data length Level Connector
AES/EBU OUT 1-4*1 AES/EBU AES/EBU Professional Use 24bit RS422 XLR-3-32 type (Balanced)*1

*1 Rio3224-D only
*2. XLR-3-32 type connectors are balanced.( 1=GND, 2=HOT, 3=COLD )